Slide background

PICOTE SOLUTIONS

Slide background

Brawoliner Supplier

Watermark Approved

New Zealand's Only

Slide background

Support Centre

Brawoliner Authorized

New Zealand's Only

Slide background

PICOTE SOLUTIONS

Brawoliner Supplier

Watermark Approved

New Zealand's Only

Slide background

Support Centre

Brawoliner Authorized

New Zealand's Only

1000 characters left
Learn everything you need to know about Picote solutions

PICOTE SOLUTIONS

PICOTE MILLER RANGE

Picote's range of Milling units are perfect for descaling pipes, root cutting and lateral reinstatement after CIPP lining.

Maxi Miller Power+
Miller

The Maxi Miller Power Plus allows the use of Picote’s unique tools in larger diameter DN150-225/6" - 9” sewers, cleaning up to DN300 / 12".

The Maxi Miller Power Plus System is designed for faster lateral reinstatements, even higher speed drain cleaning and more efficient collapsed liner removal. The Power Plus provides more than double the power compared to regular Maxi Miller (3.5kw vs. 1.5kw).

  • 20m/64ft of 18mm / ¾" shaft which can be extended by 10m / 32ft
  • Suitable for heavy duty drain cleaning with Picote Original and Cyclone chains
  • Fast reinstatements with the Smart Cutter™and Twister
  • Tough descaling with the Smart Spider
  • Challenging liner removal with the special Smart Crusher and Smart Sweeper tools
  • For DN150 - DN225 / 6" - 9"pipes
  • Can be used in DN100 / 4" straight pipes
  • 3-phase 16 amp 400v / 3.5kw / 1800rpm
  • Electric motor & safety clutch.
  • Control box can be detached and operated from access point
Maxi Miller: Powerful, Durable, Far-reaching
Miller
  • 30m of 12mm shaft with thick outer casing.
  • Suitable for drain cleaning & powering the Smart Cutter™, Twister, Collapsed Liner Twister & the Pipe Cutter.
  • For DN100 - DN250 pipes. Weighs 95kg, 1400rpm, 1500w output.
  • Electric motor & safety clutch.
  • The Spider, 6 Panel hub and DN200 twister can only be used in conjcution with the Maxi Miller
Mini Miller: Efficient, Portable, Skillful
Miller
  • Micro 12m and Mini 17m of 8mm shaft.
  • Suitable for drain cleaning DN50 - DN100 pipes.
  • Use with DN50 & DN70 Smart Cutters & Twisters.
  • Micro weighs 18kg & Mini weighs 23kg, 600 - 2900rpm, 1200w output.
  • Lightweight aluminium frame.
  • Two wheels facilitate transportation.
  • Perfect to work inside buildings.
NEW Super Midi Miller: Supersized Capabilities Offered In Picote Super Midi
Miller

Picote is launching the Super Midi, a new version of the Midi Miller with powerful upgrades for drain cleaning and reinstatements from DN70/3” to DN150/6”.

The new Midi has an electric safety clutch. It comes with the same powerful control box as Picote’s Maxi Miller and Maxi Power+ have. In addition to increased efficiency and safety, the Midi now has a 20m range with the option of adding a 10m extension. Go further in distance, efficiency & safety!

  • Excellent combination of safety, force & movability
  • 20m range with an option to add a 10m extension
  • Digital control box & electric safety clutch
  • A multi-use machine for heavy descaling, pipe cleaning & reinstatements
  • Ideal for work inside buildings: Regular outer casing for 12mm/½” shaft allows added flexibility through bends
  • Ease of use & practicality:
    • run the 110v/15amp U.S. model from a house connection in the U.S.
    • run the 110v/16amp UK model from a house connection in UK
Mini Cleaner
P-TRAP MINI MILLLER & CUTTER

POWER THROUGH P-TRAPS FOR NEW OPPORTUNITIES
The P-Trap Mini Miller is equipped with specially produced, highly flexible performance outer casing for the shaft which is durable, flame, abrasion and chemically resistant with a high continuous service temperature. Use Picote’s new Special Drill Heads (sold separately) as cutters for your P-Trap Mini Miller.

USE:
  • High speed drain cleaning
  • Blockage removal
  • Fast reinstatements through DN50, DN70 & DN100/2”, 3” & 4” P-Traps.
BENEFITS:
  • New business opportunities - specialty casing allows drain cleaning & resinstatements even through tight DN50 /2” traps.
AVAILABILITY:
  • Available as a P-Trap Mini Miller or as an add-on to your existing Mini Miller with a safety clutch (P-Trap Flexible Shaft with outer casing).


PICOTE TOOLS

TWISTER EXPRESS
Twister Exp

Now available for lined or unlined pipes, the Twister Express is up to six times faster than the original Twister. With replaceable plastic guards to prevent damage to the plastic pipe, the Express model focuses on safety as well as speed. Currently available for DN100 pipes.

The Smart Spider
Spider

The Smart Spider cleans all types of pipes fast and highly efficiently - even safe to use in PVC pipes. A unique tool designed specifically for pipes where the base or other sections are missing. Easily navigates 90 degree bends.


  • Available sizes: DN100/4” & DN150/6”. For smaller sizes in cast iron, clay or concrete pipes, use the Picote chains.
  • Easily rebuild your Spider when necessary. Affordable spare parts and rebuild packages available. The tip of the leg will wear off with use - change legs after the 8mm tip has worn out. The Spider must always be operated with its spring leader for flexibility.
  • Operate at a slower speed: Max 1000 RPM. Only operate with a Maxi Miller.
  • Attach your Smart Spider to the shaft (always use a sleeve bearing). Check the rotational direction - always rotate clockwise. Position the Spider inside the pipe by manually rotating the Spider legs. Turn your Maxi Miller on (Max 1000rpm). Now start your cleaning process. Be aware of the proficiency of the Smart Spider - continuously flush the dust out of the pipe with water when in use.
Pipe Cutter
Cutter

Simply attach special Pipe Cutter panels & centraliser to your existing Smart CutterT. Quickly and easily remove excess cured liner that has overshot during the lining process into the main line. Cut the excess piece through the lateral. For longer excess pipe, cut smaller pieces at a time until the desired length has been removed. Powered by a Picote milling machine or a hand drill. For DN70, DN100, DN150 & DN200 pipes.

The new Ultra flex is a complete unit and is used when there is a bend just before the location where the liner needs to be trimmed. The recent DN200 pipe cutter is also a complete unit and is to be powered by Maxi Miller. Ask your reseller for further information.

Picote Grabber
Grabber

Ever lose a tool or other important item down the drain? Avoid digging up costly mistakes with the new Picote Grabber. Simply select and attach the best grabbing head for the job and you’re ready to reclaim that tool or item, weighing up to 35kg. Push the cable into place and switch on the air supply to get a grip on the object. The customised steering function allows the grabbing head to rotate due to the cable inside, making it much easier to grip the item. Pull the tool out of the drain and then simply turn off the air to release it.

Twister Liner Remover
Twister Line R

The Twister Liner Remover (Duo) is a specialty tool designed to remove collapsed liner. It has two front brushes for stabilisation. The Duo has been upgraded with a custom built flat drill head. The impressive new 3mm front metal panel features more carbides which are larger than the previous model, enabling it to perform collapsed liner removal for DN100 and DN150 cast iron or concrete pipes more efficiently than before.

Original Descaling Chains
Descaling

For the general cleaning of pipes these are highly regarded as the first choice of many technicians. This style of chain is also very proficient at removing fat and root blockages when used in conjunction with our special cutting head.

Cyclone Chain
Cyclone

Suitable for use with pipes that are in a bad state or even cracked. The centrifugal force is evenly distributed inside the pipe so it will not bang the sides. Easily removes hard materials, such as lead, tree roots and concrete. The Cyclone is also used to eliminate any excess debris after using the Twister to remove collapsed liner inside cast iron pipes

6 Panel Hub
Hub

Our latest 6-panel hub is only compatible with our larger Maxi miller. When used in the size range of DN100-200 the 6-panel hub will quickly and efficiently reinstate lateral connections as well as remove imperfections like wrinkles, creases and fins from liners and patch repairs.

Smart Cutter
Cutter

The award-winning Smart Cutter is a unique lateral cutter for DN32 - DN200 drains. This unique system has successfully reinstated over 30,000 branches worldwide to date inside cast iron, concrete and clay pipes.

The Smart CutterT not only eliminates the need for traditionally expensive methods, but its user friendly and fully customisable design also greatly reduces training and maintenance costs and can also be used as an aid for robots, or for the Twister to achieve a smooth finish.

Navigating 90° bends and diameter transitions effortlessly, the Smart CutterT accurately shapes openings without accidental damage to the original pipe.

A great remedial tool, the Smart CutterT also removes lead, nails, roots, fins and epoxy slugs as well as other inconsistencies such as wrinkles in the pipe.

Achieve more with less time and a much smaller budget. Offer small drain rehabilitation from DN32 - DN200. Packages can be customised. Ask your reseller for further information.


LATERAL CUTTERS



For more information on our range of comprehensive system and supply solutions call and speak with APS today.

New Zealand-wide Delivery!

Official Brawoliner Distributors in New Zealand AS/NZ3500 approved lining systems delivered direct across New Zealand.
Call 09 222 1035
watermark approvedwatermark approved

For New Zealand Wide Delivery Call Us On 09 222 1035 Call Today

Why Choose Us

APS' relining technology is already trusted in millions of dollars of pipe rehabilitation sales across New Zealand every year.
Not only are the solutions a reliable method of rehabilitating lines, but can be a key component in transforming the revenue and profitability of plumbing and drain companies. Discover how existing clients are already using relining to advance their businesses.

TRUSTED IN PROJECTS

From residential repairs to commercial and municipal projects, our inversion relining, satellite junction repair and patch repair solutions are trusted by many of the leading plumbing companies in New Zealand.

BUSINESS SUCCESS

Offering the best relining solutions in the market can bring considerable revenue benefits to clients.

PROVEN REVENUE AND PROFIT SUCCESS

Our systems have a proven track record of increasing plumbing company revenues and profitability, with millions of dollars of relining projects using our system undertaken across New Zealand every year. Discover more about our success stories here, including video testimonials from our clients.

TESTED & TRUSTED

The inversion relining process is solid enough for clients to feel able to provide guarantees from 50 years to even lifetime guarantees for as long as home owners live in the home. The reliability of the system can help provide you with a competitive advantage in the market.